Misting Nozzles
Ultra-fine brass atomizing anti-drip nozzle with a stainless steel insert and complete with an O-Ring seal that can be hand tightened. The nozzle is designed with a ball and spring to stop the flow of mist once the water source is shut off. The nozzle can be disassembled for easy cleaning.
Our patented misting anti drip nozzles are designed to accomplish an extremely high emission velocity with a low flow rate. Liquids are atomized into aerosol particles, which flash-evaporate evenly into the environment, creating an ultra-fine mist. Our misting nozzles will atomize liquid even in climates with fairly high relative humidity with a very low increase of humidity.
The misting nozzle size allows it to be placed into small confined spaced. No wrench is needed for tightening. The self-sealing O-ring provides a leak proof seal that means no Teflon tape or sealant is required. The O-rings and ball stem are Viton, for better wear when used in harsh environments, high calcium or any kind of chemical.
Our misting nozzles create an extremely fine fog and each water droplet is less than 50 microns in size (1/10th. the size of a human hair.) The pin (impeller), orifice, and nozzle body are designed in such a way that when fluid is forced through, a very fine cone-shaped fog is created. Our misting nozzles are ideal for outdoor cooling, greenhouse misting, humidification systems, warehouse cooling, special effects fogging and all types of industrial misting and cooling systems.
Clogged nozzles that have calcium build up can be cleaned by soaking them in CLR or a half white vinegar and water solution for 15 to 30 minutes. Before you re-install the nozzles, rinse each nozzle thoroughly and make sure you flush each nozzle port before re-installing each nozzle.
Nozzle Features
- Hand tightening: no wrench necessary for tightening or removing.
- Self-sealing O-rings for leak proof seal.
- Consistent misting pattern.
- Nozzle length only 5/8″ long allowing to be installed in tight spaces.
- Anti-drip ball & spring which prevents nozzle drip.
- Cleanable
- Clean appearance
- Long lasting
- Stainless steel orifice with a brass outer layer.
- Quiet
- Fine Atomization: each nozzle delivers billions of water droplets that are less than 1/10th the size of a human hair.